Home News Autonnic Components Fluxgate World Subsystems Wind Speed and Direction Vector Module OEM Compass Absolute Shaft Angle Encoders OEM Inclinometer Compass NMEA Compass Current Sensor Application Notes About Autonnic Contact Us Autonnic Research Limited Woodrolfe Road Tollesbury Essex CM9 8SE T +44-162-186-9460 F +44-162-186-8815		Fluxgate World Subsystems A5012 Wind Speed and Direction. This subsystem produces information about both the direction and the speed of the wind. The data is available as either NMEA-0183 serial digital or as analogue SIN/COS for direction and a linear voltage for speed. A4036 - Vector Module. The 3rd-axis technology patented by Autonnic is available from the FluxgateWorld division as a number of partially and fully implemented subsystems. The Vector Module is the building block of Force-Vector sensing and Joysticks. A4020 OEM Compass. These subsystems generate analogue and digital compass direction information in various serial data stream formats. They are 2-axis tilt corrected and include set-zero and auto-calibrate functions. A3030 - Absolute Shaft Angle Encoders. These absolute shaft-angle encoders are available for those applications which need a stable, low-cost absolute wear-free encoder to IP68. Versions are available with analogue and digital outputs, comparators for limit alarms, position control and special products e.g compass pickup. A4025 OEM Inclinometer Compass. An OEM sub-system giving analogue and digital information about heading as well as both pitch and roll up to ±37° with 0.1° of resolution. A5020 - NMEA-0183 Compass. A complete sub-system with auto-calibration and set-zero with 2-axis correction to ±45°. Enclosed to IP67. A4100 - Current Sensor. A range of DC magnetic sensors for circular fields, these can sense current from the field around a single wire. They show excellent zero stability and zero dissipation – even under fault current and are suitable for high-voltage or DC leakage trips.